Table of Contents
Advertisement
2.2.3 Switch Setting of DAIC Card
Refer to
Chapter
3,
Section
2.2.4 Mounting of DAIC Card
STEP 1: Set MB switch on DAIC card to up position.
STEP 2: Mount DAIC card in the AP slot on the Remote PIM.
A maximum of two DAIC cards can be mounted.
After mounting the card, set MB switch to down position.
STEP 3: After mounting all DAIC cards, set MB switch on DAIB card to up, and then down.
• Small Platform
Remote PIM
DAIC CARD
2.1.3.
Figure 3-17
Mounting Location of DAIC Card (Remote PIM)
ND-46550 (E)
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
P
W
R
CHAPTER 3
Page 41
Revision 2.0
Advertisement
Table of Contents
