Voiceband Audio - Motorola G24 Developer's Manual

Module hardware description
Hide thumbs Also See for G24:
Table of Contents

Advertisement

The digital audio interface supports 4 types of audio data formats, which define the PCM bus
configuration and data rates:
Voice band audio - Intended for speech during voice calls and for mono rings and alerts.
Stereo audio - Includes 3 audio formats that support high quality stereo ring tones and alerts.
The PCM bus configuration is defined by the audio data format that is sounded through the digital
audio path, as described in
Audio Mode
Voice
Mono tones
Stereo low tones
Stereo mid tones
Stereo high tones

Voiceband Audio

This digital voice audio format is used for speech during voice calls and for mono rings and
alerts.
The PCM bus signal's configuration for voiceband audio is:
PCM_CLK - 512 kHz serial clock
PCM_FS - 8 kHz bit-wide frame-sync
PCM_DOUT - 13-bit linear audio data output
PCM_DIN - 13-bit linear audio data input
The analog audio is sampled at an 8 kHz rate and converted to linear 13-bit serial PCM audio
data. The serial data is transferred on the PCM bus in 16-bit word format, which includes 13
sampled data bits, and 3 added zero value bits.
The 16-bit serial data is transferred in both directions after each sync signal's falling edge. The
sync signal pulse duration is one clock period, after which the serial data is transferred in both
directions for 16 consecutive clock periods.
Following the 16-bit data transfer, the serial input and output data signals inactivate until the next
sync pulse, which occurs every 125 µS (8 kHz). It is recommended the serial data signals will be
High-Z during the inactive period. The bus clock and sync output signals remain active all the
time.
Important:
January 1, 2006
Table
2-10.
Table 2-10: Digital Audio modes
Frame Sync
Sampling
8 kHz
8 kHz
20.05 kHz
32 kHz
44.1 kHz
In digital audio mode the input and output gains cannot be controlled by AT
commands.
Module Hardware Description
Chapter 2: Hardware Interface Description
Bit Clock
AT+CRTT Tones
520 kHz
520 kHz
6 - 9 (7 default)
705 kHz
12 - 38, 40 - 46
1024 kHz
48 - 49
1.4 MHz
10, 11, 39, 47
35

Advertisement

Table of Contents
loading

Table of Contents