Audio Interface; Handset Microphone Port - Motorola G24 Developer's Manual

Audio Interface

Audio Interface
The G24 audio interface supports several audio devices and operating modes.
The audio interface's operating modes, active devices, amplification levels and speech processing
algorithms are fully controlled by the host application, through advanced programming options
and a versatile AT commands set.
The G24 supports the following audio devices:
•
Two single-ended and biased mono analog microphone inputs for use in a variety of modes.
•
Two differential mono analog speaker outputs for use in a variety of modes.
•
A digital serial interface using PCM coding.
Figure 2-16
Figure 2-16: Audio Interface Topology

Handset Microphone Port

The handset microphone port is the G24 power-up default active audio input for voice calls. It is
located on pin 61 at the G24 interface connector, named MIC.
It is designed as a single-ended input and should be referenced to the G24 analog ground.
The microphone input includes all the necessary circuitry to support a direct connection to an
external microphone device. It incorporates an internal bias voltage of 2.1V through a 2.2kΩ
resistor, and has an impedance of 1kΩ.
28
shows the audio interface topology.
Module Hardware Description January 1, 2006