Figure 3-30 Connection Of D Term - NEC NEAX 2400 ICS Manual

3.7.4 Cable Termination and Cross Connection from the DRU-23-S3 to the D
START
Cable running
Termination of Cables
Check terminal locations on the
DRU-23-S3 side of the IDF
Cross Connection
END
DRU-23-S3
DRE card
CHAMP1
CHAMP0
CHAMP
CONNECTOR
(MALE)
CHAMP Connector Cable (25P)
While referring to Figure 3-30, run cables between each D
and its Modular Block (Jack), and between the Modular Blocks
and the IDF.
Protect the cables using cable ducts, etc.
While referring to Figure 3-28, terminate the installed cables to
the IDF and the Modular Blocks.
While referring to Figure 3-31, identify the lead names for the
CHAMP Connector of DRU-23-S3 and the terminal locations
of the leads.
While referring to Figure 3-28, provide cross connections at the
term
D side and the DRU-23-S3 side.
IDF
1-PAIR CABLE
Figure 3-30 Connection of D
ND-45383 (E)
MODULAR BLOCK
(JACK)
MODULAR
CABLE
term
term
term
term
D
CHAPTER 3
Page 105
Revision CD 1.0