Cleaning And Care; Cleaning With The Brush - Silvercrest SRR 3.7 B2 Operating Instructions Manual

3) After you finish trimming, press the on/off switch 6
back to its initial position .
4) Clean the long hair trimmer 3 with the supplied
brush e . For a more thorough cleaning, read the
section "Cleaning and care" .

Cleaning and care

nect the power plug q from the power socket! There is
risk of electric shock!
caustic cleaning agents to clean this appliance . This will
irreparably damage the appliance .

Cleaning with the brush

Cutter block
Clean the 3 shaving heads of the cutter block 2 after
every shave using the brush e .
1) Press the release button 4 so that the cutter block 2
pops open/can be folded back .
2) Tap the cutter block 2 on a flat surface or blow off
the hair trimmings .
3) Use the brush e to remove any remaining hair
trimmings .
SRR 3.7 B2
Before cleaning the device, discon-
Do not use abrasive, chemical or
│
17
US-EN
■