Cleaning Under Running Water - Silvercrest SRR 3.7 B2 Operating Instructions Manual

Long hair trimmer
Clean the long hair trimmer 3 after every use with
■
the supplied brush e .
Oil the long hair trimmer 3 approximately every
■
6 months with a drop of sewing machine oil .

Cleaning under running water

1) Press the release button 4 so that the cutter block 2
pops open .
2) Stretch out the cutter block 2 past the initial locking
position until it can be pulled upwards and off .
3) Hold the cutter block 2 under running water so that
the water flows through the shaving heads from the
inside to the outside .
running water! The shaver handset can be damaged
irreparably if it is held under running water .
│
■ 18
US-EN
Hold only the cutter block 2 under
SRR 3.7 B2