Descaling Mode - Silvercrest SEMM 1470 A1 Operating Instructions Manual

Descaling mode

After 500 uses, the appliance indicates that it needs to be descaled.
The control lamp for the "Large" latte button
"Small" latte button
up.
CAUTION – PROPERTY DAMAGE
■ You can continue to use the appliance, but we recommend descaling since
neglecting to do so could damage the appliance and eventually it will
become unusable.
NOTE
► You can also carry out the descaling programme before 500 uses. To do
so, please proceed as described below.
1) Switch the appliance off using the on/off switch
plug from the wall socket.
2) Fill the water tank
3) Place the empty milk tank
4) Turn the "Milk quantity" knob
5) Place the sieve holder
6) Place a suitably large, empty container on the drip grille
7) Adjust the milk nozzle
8) Insert the plug into a mains power socket and switch on the appliance using
the on/off switch
As soon as the appliance has heated up, the control lamp on the "Large"
latte button
flash alternately indicating that the appliance needs to be descaled.
9) Press the "Large" latte button
taneously. The appliance starts the descaling process. All of the control lamps
light up in sequence.
Steam and hot water come out of the milk nozzle
The descaling process is finished in around 10 minutes and all of the control
lamps come on permanently.
10) Empty the rest of the water/vinegar mix out of the water tank
the water tank
11) Empty the container on the drip grille
SEMM 1470 A1
flash alternately as soon as the appliance has heated
with 400 ml of vinegar and 600 ml of water.
in the appliance.
to the "Clean"
in the appliance with the espresso sieve (
so that it is pointing into the container.
. The appliance heats up.
and the control lamp on the "Small" latte button
and the "Small" latte button
(see section "Cleaning the water tank").
and the control lamp for the
and disconnect the mains
position.
.
.
and replace it.
GB │ IE
or ).
simul-
and clean
│ 55 ■