ANT
Bar Antenna
Description:
Enables or disables the bar antenna.
Function:
Due to the size limitations of the helical antenna, it may not be suitable for low HF
band reception. The transceiver has a built-in bar antenna for reception of HF
frequencies. This function allows the transceiver to automatically switch to the bar
antenna when a frequency is selected a below 10.1 MHz for the B-band.
Send:
Status:
ANT
Modify:
ANT [val]
Return:
ANT [val]
Where:
[val]
see State Table
Notes:
Example:
Sent:
ANT
Return:
ANT 0
Sent:
ANT 1
Return:
ANT 1
Requesting status of bar antenna.
Transceiver says that bar antenna is off.
Requesting bar antenna to be on.
Confirming that bar antenna is now on.
Menu Item #
26
56