Advertisement
９．
OPERATION
The drive unit for the electromagnet is installed in the bottom frame.
Molded and wired on the printed circuit.
The closing circuit can be operated using either in AC or DC by the drive unit.
The optional latch trip circuit uses DC as standard.
When a latched contactor is operated using AC power, it is recommended that a
Capacitor trip device be used.
The standard operating voltage is as follows:
Non-latched type(normally energized) : 100－240 V AC /100－220V DC
Latched type :100－240V AC /100－250V DC closing voltage
:100－110V DC
Ｄｉｏｄｅ
（Ｌａｔｃｈｅｄ ｔｙｐｅ）
１
２
CAUTION : Do not touch the drive unit without trouble.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
５２ＣＣ
ＯＳＣＩＬＬＡＴＩＯＮ
ＳＷＩＴＣＨＩＮＧ
Fig.3 Internal Configuration of Drive Unit
-
１０ -
tripping voltage
ＴＩＭＥＲ
ＰＯＷＥＲ
6F9G0154
ＶＯＬＴＡＧＥ
ＤＥＴＥＣＴ
Advertisement
