Table of Contents
Advertisement
Mount the ACH550 into the mounting channel by hooking the bot-
tom mounting slots over the bolts and then tilting the top of the
drive back into the channel.
Lift the drive slightly to slip the top keyhole slots over the mount-
ing studs, and then lower the drive fully.
Place a nut loosely onto each of the two (2) studs.
After the drive is positioned , tighten all 4 mounting screws/nuts.
14
- Quick Links:
- Table of Contents
- Step 1: Verify that the Correct...
- Step : Record Existing Parameter Settings
- Step 11: Disconnect Customer Installed Control...
- Step 18: Reinstall the New Control...
- Step 19: Reinstall the Customer's Control...
- Step 4: Verify that the Signals...
- Parameter Conversion List
Hide quick links:
Advertisement
Table of Contents
