Motor Modules With Internal Air Cooling; Description - Siemens SINAMICS Series Equipment Manual

Motor Modules Booksize

4.2 Motor Modules with Internal Air Cooling

Characteristics of the motor modules:
• Single type from 3 A to 200 A
• Double type from 2x3 A to 2x18 A
• Internal/external air cooling
• Short-circuit/ground-fault-proof
• Integrated DC link and electronics current busbar connection
• Integrated "safe motor brake control"
• Electronic type plate
• Operating status and error status via LEDs
• DRIVE-CLiQ interface for communication with the control unit and/or other components in
4.2 Motor Modules with Internal Air Cooling
4.2
4.2.1

Description

A motor module is a power unit (inverter) that provides the power supply for the connected
motor(s). Power is supplied by means of the DC link of the drive unit. A motor module must
be connected to a control unit via DRIVE-CLiQ. The open-loop and closed-loop control
functions for the motor module are stored in the control unit.
One motor can be connected to single motor modules and two motors can be connected to
double motor modules.
4-2
the drive line-up.
– Integration in system diagnostics
Equipment Manuel for Booksize Power Modules
Manual, (GH2), Edition 06.2005, 6SL3097-2AC00-0BP2