Limitations Of Outputs - Sony XDCAM EX PMW-EX1 Operating Instructions Manual

Output formats in clip playback mode
(Media mode)
Analog component signals from the
COMPONENT OUT connector are output in the
format shown below according to the video
format of the playback clip and the "YPbPr/SDI
Out Select" setting (HD or SD) of the VIDEO
SET menu.
The SDI OUT connector outputs serial digital
signals of the same format converted from the
analog component signals fed from the
COMPONENT OUT connector.
Note
No signal is output from the A/V OUT connector
when "YPbPr/SDI Out Select" of the VIDEO
SET menu is set to "HD" or "SD."
When the frame rate setting of the video format
is 59.94i/59.94P/29.97P/23.98P
Clip format Output format
YPbPr Out
Select: HD
1080/59.94i 1080/59.94i
1080/29.97P 1080/29.97PsF
1080/23.98P 1080/59.94i
720/59.94P 720/59.94P
720/29.97P 720/59.94P
720/23.98P 720/59.94P
1080/50i 1080/59.94i
1080/25P 1080/29.97PsF
720/50P 720/59.94P
720/25P 720/59.94P
1)
No signal is fed from the SDI OUT connector.
2)
The actual frame rate of the output signal is 1.001
times of the value shown in the table. Some frame may
be repeated when converting the frame rate.

Limitations of Outputs

The outputs from the camcorder are limited by the VIDEO SET menu settings as follows. These
limitations are common to Camera mode and Media mode.
Menu settings i.LINK I/O
YPbPr/SDI Out Select HD
Outputs from i.LINK(HDV)
the output
SDI OUT
connectors
COMPONENT OUT
A/V OUT
YPbPr Out
Select: SD
480/59.94i
480/59.94i
480/59.94i
480/59.94i
480/59.94i
480/59.94i
480/59.94i
1), 2) 1)
480/59.94i
1), 2) 1)
1), 2) 480/59.94i 1)
480/59.94i
1), 2) 1)
Enable Disable
HD
HDV No signal
No signal HD
HD HD
No signal No signal
When the frame rate setting of the video format
is 50i/50P/25P
Clip format Output format
YPbPr Out
Select: HD
1080/59.94i 1080/50i
1), 2)
1080/29.97P 1080/25PsF
1080/23.98P 1080/50i
1), 2)
720/59.94P 720/50P
1), 2)
720/29.97P 720/50P
1), 2)
720/23.98P 720/50P
1), 2)
1080/50i 1080/50i
1080/25P 1080/25PsF
720/50P 720/50P
720/25P 720/50P
1)
No signal is fed from the SDI OUT connector.
2)
The actual frame rate of the output signal is 1/1.001 of
the value shown in the table. Some frame may be
deleted when converting the frame rate.
Enable Disable
SD SD
HDV No signal
No signal SD
SD SD
No signal No signal
Formats and Limitations of Outputs
YPbPr Out
Select: SD
576/50i
1)
576/50i
1), 2) 1)
576/50i
1)
576/50i
1)
576/50i
1)
576/50i
1)
576/50i
576/50i
576/50i
576/50i
Enable Disable
Off Off
HDV No signal
No signal No signal
No signal No signal
SD SD
117