Storing/Retrieving The Setting Data; Storing The Setup File; Retrieving The Setup File; Resetting To The Standard Values - Sony XDCAM EX PMW-EX1 Operating Instructions Manual

Storing/Retrieving the
Setting Data
You can store all the menu settings (including
picture profiles) as a setup file on an SxS memory
card.
By retrieving the stored setup file, the proper
setup condition can be immediately obtained.
For the setup file operations, use "Camera Data"
of the OTHERS menu.
Note
The Clock Set, Time Zone, Hours Meter (page
107) values are excluded.

Storing the Setup File

Only one setup file can be stored on one SxS
memory card.
1
Insert a memory card on which you
wish to store the setup file to a card slot.
Check that the corresponding memory card
icon is displayed on the screen. If a memory
card in the other slot is selected, press the
SLOT SELECT button to switch.
2
Select "Camera Data" from the
OTHERS menu.
OTHERS
Return
A l l Reset
Camera Data
Time Zone
Clock Set
00:00
Language
Assign Bu t t on
3
Select "Store."
"Cancel" and "Execute" appear to the right.
4
Select "Execute."
Writing of data to the memory card begins.
An in-progress message is displayed during
writing. When writing is completed, a completion
message is displayed.
76

Storing/Retrieving the Setting Data

Return
B
Store
B
: UTC +09:00 Recall
B
: Eng l i sh
B
Notes
• If a setup file already exists on the memory card
1
you specified in Step
whether to overwrite the file is displayed.
• If there is not sufficient space on the memory
card, an error message is displayed.

Retrieving the Setup File

When you retrieve the stored setup file, the
camcorder settings are changed according to the
file.
1
Insert the memory card on which you
stored the setup file into a card slot.
Check that the corresponding memory card
icon is displayed on the screen. If a memory
card in the other slot is selected, press the
SLOT SELECT button to switch.
2
Select "Camera Data" from the
OTHERS menu.
3
Select "Recall."
"Cancel" and "Execute" appear to the right.
4
Select "Execute."
Reading of data from the memory card
begins.
An in-progress message is displayed during data
reading. When the read-out is completed, a
completion message is displayed, indicating that
the camcorder settings have been changed
according to the setup file.

Resetting to the Standard Values

The current camcorder settings you made through
various menu and button operations can be
collectively returned to the standard statuses
(factory settings) by executing "All Reset" of the
OTHERS menu.
, a message to confirm