Hitachi L3200 Manual page 15

Base setting
Call Barring Function
Call barring enables you to restrict
or bar certain types of calls from
your phone.
To set call barring number
Select<Call barring> under
BASE mode;
Select <Barring number> under
Call Barring
Press LEFT key, then key in the
PIN(the default PIN is 0000);
The display shows one of the
numbers form 1 to 5 (the
maximum call baarring numbers
you can set)
Press LEFT key to confirm
...........................................................................
...........................................................................
To delete call barring number
See 1-3 step above, then press
LEFT key, the display shows
the call barring number you
set.
Press and hold RIGHT key to
clear the number
Press LEFT key to confirm
To change Base PIN Default settings
Select <PIN> under BASE
mode
Press LEFT key, and key in
the original PIN number
Then press LEFT key to
confirm, and key in New PIN
Press LEFT key, then key in
New PIN again
Press LEFT key to confirm.
The following is default
settings for your information
Select<Default setting> under
BASE mode
Press LEFT key, and key in
the original PIN number
Press LEFT key to confirm,
you will hear a beep, then all
features will return to their
default settings.
1) Reset Flash time to long,
2) Delete call barring number.
3) Reset master pin number to
0000
4) Reser ringer melody and
volume
5) Dial mode reset to Tone.
6) Reset DTAM ring(if any)
7) Remove Auto Pause number
8) Remove LCR(if any)
9) Reset SMSC settings.
Page 15