Table of Contents
Advertisement
Preparing your telephone for use
Please note the battery cell polarity during insert
1. Choose a suitable site for the base
unit.
Make sure it is not near to another
telephone, nor to other electrical
equipment.
2. Plug the mains power lead and the
telephone line cord into the rear of
the base unit.
3. Plug the mains adapter into a 230 V
AC, 50 Hz mains socket with the
switch on the socket set to OFF.
Note: The illustration of adaptor
may vary from country to country.
...........................................................................
...........................................................................
4. Fit the battery in the handset(s)
Insert the battery cell following the battery polarity
indication.
Push the latch inwards, and then slide the cover
until it clicks firmly into p
5. Connect the base unit to the
telephone line
Switch off power at the mains socket.
Insert the telephone line plug into the
socket.
Switch mains power back on
Note:
osition.
1. The charge pod does not have a
connection to the telephone line.
2. The illustration of telephone's
socket may vary from country to
country.
Page 4
Advertisement
Table of Contents
