Handset Registration - Hitachi L3200 Manual

Handset registration

Handset registration
Your L3200 is supplied with the
handset already registered to the
base unit, and you shouldn't need
to register it, but if you've bought
extra handset, you'll need to
register each one to your original
base unit. Maximum 4 handsets
can be registered to one base.
...........................................................................
...........................................................................
To register a handset
Press and holf the HANDSET LOCATOR button on the base unit
for a while, until you hear "beep" sound twice continuously
Press LEFTkey, then UP/DOWN button to the location
REGISTRATION;
Press LEFT key, then UP/DOWN button to the location BASE
SUB;
Press LEFT key again, the display shows BASE1, BASE2 BASE3
, BASE4;
Press UP/DOWN button to scroll through the base, and press
LEFT key, this displays a system number, press okey. Enter base
PIN, and press LEFT key to confirm;
After a while, when the handset finds the base unit, it goes back
to the standby mode.
To de-register a handset
You may need to do this if you have
more than one handset registed
to your base unit and you need to
replace a faulty handset.
Select <de-register> under
REGISTRATION mode.
Press LEFT key, then key in
the PIN(default 0000)
Press LEFT key, then key in
the number of the handset
you want to de-register.
Press LEFT key to confirm.
Note: You cannot de-register the
handset you are currently using.
Page 17