Table of Contents
Advertisement
20.4 IP and TCP/IP
The Internet Address:
FP Web-Server V2.810 EN
2. Press [INITIALIZE] to send the firmware and base configuration to the
unit
3. Press [SEND] (and optionally activate the "Web files" check box) to
transfer the new configuration to the unit
4. If requested, enter user name and password
If you have forgotten the password, clear the password with DIP switch
4. For further questions, please contact your local Panasonic provider.
Every Ethernet participant must have an individual IP address. This address
may not be used a second time in the same network. The IP address
consists of 4 numbers (any 0 to 255). The first numbers define the network
address, the other numbers define the participant's address.
To be independent from the medium as well as the platform, one should
not adjust the addressing of a single bus system when specifying the
communication system. The concept of the Internet is based on one's own
address, i.e. the Internet address. The Internet address is comprised of
32-bits and is divided into a network part and a participant's part. While
the Ethernet address is displayed hexadecimally, for the most part, the
decimal notation is normally used for the Internet address. Every byte is
represented by its decimal value. Valid address specifications are numbers
between 0 and 255.
Example:
would be displayed
as:
Therefore, special address conventions have been agreed upon:
0011 1001
0011 1101
/
/
57.
61.
Additional information
111 0010
0001 1001
/
242.
25
179
Advertisement
Table of Contents
