Table of Contents
Advertisement
FPWEB Script
N o t e
10.1.2 Start PPP connection
10.1.3 Start FTP transmission
N o t e
FTP transmission base time
FTP sending cycle
70
Disable this function if not used to save the FP Web-Server's memory.
If this function is enabled, the FP Web-Server starts a PPP connection
before transmitting files via FTP or sending e-mails. Additional settings in
the section Dial-out (see p. 146) are needed.
If this function is enabled, the FP Web-Server checks the SD card on the
expansion unit and transmits the stored files of the data logger function
(see p. 61) or manually created files.
No PLC is needed to control the data transmission.
Preset the additional settings in the "FTP client (see p. 52)" tab.
In the default configuration, all files of the configured data logging function
will be transferred. After successful transmission the files will be renamed
(e.g. Myfile.CSV to MyFile.CS_ ).
The file which is currently used to log will not be transferred.
Preset the transmission time. Starting from this time of the current day the
internal function FPWEB_FTP( ) checks the SD card for files to transmit.
Preset the time before checking the SD card again for files to transmit. If
files could not be sent before, this time (in seconds) defines the retry time.
FP Web-Server V2.810 EN
Advertisement
Table of Contents
