Select Cable - Suzuki SQ416 Service Manual

SELECT CABLE

[Type-1]
1. Select lever assembly
2. Bolt
3. Select cable
4. Cable bracket
5. Bolt
6. Blank
7. Washer
8. Clip
9. Nut
10. Manual select lever
11. Lock washer
12. Nut
13. Select cable joint
14. Bush
15. Washer
16. E-ring
17. Transmission range switch assembly
18. Bolt
ADJUSTMENT
(For Type-1)
1) Before tightening cable end nut, shift select lever to "N".
2) Also shift manual shift lever to "N".
1. Transmission range
sensor (switch)
2. Select cable
3. Manual shift lever
4. Select cable joint
[Type-2]
1. Selector lever assembly
2. Selector lever assembly
mounting bolt
3. Selector cable
4. Cable bracket
5. Cable bracket mounting bolt
6. Washer
7. Clip
8. Manual select lever nut
(transmission range switch side)
: Tightening Torque
NOTE:
D Make sure that nut and cable joint have clearance under
above conditions.
D If select cable has been moved, push it in arrow C direc-
tion as shown in figure at the left till it stops and then con-
firm that select lever is in "N" position.
AUTOMATIC TRANSMISSION (4 A / T) 7B1-5
9. Lock washer
10. Manual select lever
11. Transmission range
switch assembly
12. Transmission range
switch mounting bolt
13. Manual select lever nut
(selector cable side)
14. Selector cable clip