Adding capacity to virtual drives
This section describes a procedure of adding capacity to a virtual drive in the disk
array such as RAID level 0, 5, and 6 configurations.
Adding capacity can be done from MegaRAID Storage Manager. See MegaRAID
Storage Manage Instruction Manual, contained in the "DriverKit & Manual"
CD-ROM.
1. Click Virtual Drives in the main menu.
You cannot cancel adding capacity to a virtual drive in the middle.
If multiple virtual drives reside on the same Drive Group or if all the
capacity of the Drive Group has not been used up, capacity
expansion is not supported.
In order to add capacity, you need to have physical drives with
"Unconfigured Good" status.
MegaRAID WebBIOS
Hitachi Compute Rack 210H/220H BIOS Guide
2-65