Tpm Support Setting - Hitachi 220H Bios Manual

TPM SUPPORT setting

If you use Windows BitLocker function, perform the following procedures.
1. Change the setting of TPM SUPPORT to Enable.
2. Save settings and exit the system BIOS setup menu.
See Exiting system BIOS setup menu
3. Restart the system unit, and then start the system BIOS setup menu.
See Starting system BIOS setup menu
4. Change the setting of TPM State to Enabled.
5. Save settings and exit the system BIOS setup menu.
6. Restart the system unit, and then start the system BIOS setup menu.
7. Confirm the displaying of TPM Enabled Status and TPM Active Status is
Enabled and Active.
Otherwise, leave the setting for TPM SUPPORT as disable (default).
1-14
When the system unit is restarted while TPM SUPPORT is enabled,
TPM State may be enabled after starting the setup menu in the first
time. In this case, also you should save the setting of setup menu.
System BIOS
Hitachi Compute Rack 210H/220H BIOS Guide
on page 1-56.
on page 1-3.