Switching the display mode
This section describes switching disk array display modes in the main menu.
There are two types of display mode: Logical View and Physical View.
The Logical View mode displays a list of disk array configurations that are
already set.
The Physical View mode displays a list of physical disks comprising a disk array
configuration.
The Logical View mode is applied when the MegaRAID WebBIOS is
started.
To switch to the physical view mode, click Physical View in the
Logical View mode of the main menu.
To switch to the logical view mode, click Logical View in the Physical
View mode of the main menu.
MegaRAID WebBIOS
Hitachi Compute Rack 210H/220H BIOS Guide
Logical View mode:
●Virtual drives
(Logical drives)
● Drives
(physical drives)
● Hot spares
Physical View mode:
● Drives
(physical drives)
2-27