See also
How to calibrate a touch panel (Page 59)
1.4.2.4
How to calibrate a touch panel
NOTICE
Service life of the touch screen
Do not touch the operating elements of the display with pointed or hard objects. This may
considerably reduce their service lives.
With each HT 8-device, a Touchpen (order no. 6FC5348-0AA08-4AA0) is delivered. This
should be used for calibration purposes and during operation.
Calibrate touch screen
The calibration is automatically started after switching on HT 8.
1. Follow the instructions on the screen:
2. Press the three calibration items one after the other.
This completes the calibration.
3. Press the corresponding horizontal softkey on the touch screen to close the command shell
and to re-establish the connection to the desired PCU.
Operator panel front: OP 012
Manual, 09/2016, A5E36371591B
General information and networking
1.4 Networking
59