Storing The Still Picture Sent From The Remote Party As The Jpeg Format - Sony PCS-6000 Operating Instructions Manual

Storing the Still Picture Sent From the Remote Party As the JPEG format

2
Select the Load with the joystick on the Remote Commander, then
press the joystick.
The following screen appears.
Still Image
Send D: \ ...\ user \ data
1300_01.jpg
Continuous Send
40i_02.jpg
Clear
40i_03.jpg
IMG_7174.jpg
Save
IMG_7765.jpg
Previous Picture
IMG_8218.jpg
IMG_9792.jpg
Pointer
s1_01s.jpg
Send Object
3
Select the desired file with the joystick on the Remote Commander,
then press the joystick.
The still image is displayed.
4
Select Send with the joystick on the Remote Commander, then press
the joystick.
5
Press the joystick on the Remote Commander.
The selected still picture is sent.
D:\...\user\data: the directory of the internal hard disk drive
(E): the directory of the CD-ROM
(F): the directory of the "Memory Stick"
1
Open the Still Image menu after receiving a still picture.
2
Select Save with the joystick on the Remote Commander, then press
the joystick.
3
Select the desired location where the still picture will be stored with
the joystick on the Remote Commander, then press the joystick.
The still picture is stored.
Notes
• The file name is saved in the numerical order from DSC00000.jpg.
• When editing a file, select File Access from the Data Conference menu.
For details, see "Editing the File" on page 87.
Chapter 2 Basic Operation During a Meeting
81