Table of Contents
Advertisement
Menu Items in the Setup Menu
Dial Setup Menu
Page 1
32
Chapter 1 Preparation
Sets up the attribute for calling.
Dial Setup
Page: 1/4
Line I/F:
BRI
Bonding:
Auto
Number of Lines:
8B
LAN Bandwidth:
1920 Kbps
Prefix:
Prefix-None
Restrict:
Auto
Save
Line I/F: Selects the line interface.
BRI: Connects to a TV conferencing system via the BRI interface.
PRI: Connects to a TV conferencing system via the PRI interface.
PRI-S: Connects to a TV conferencing system using H
America), H
(for European countries) of the PRI interface.
12
Telephone: Connects to a phone to have a voice meeting via the normal
ISDN line.
V.35: Connects to a TV conferencing system via the V.35 interface.
LAN: Connects to a TV conferencing system using a LAN.
RS-449: Connects to a TV conferencing system via the RS-449 interface.
Notes
• When the optional BRI Board is not installed, you cannot select BRI from
Line I/F.
• When the optional PRI Board is not installed, you cannot select PRI from
Line I/F.
• When the optional V.35 Board is not installed, you cannot select V.35
from Line I/F.
• When the optional RS-449 Board is not installed, you cannot select RS-
449 from Line I/F.
• When the system is not upgraded using the optional PCS-UC601
Upgrade Kit, you cannot select LAN from Line I/F.
Bonding: Selects whether to use the Inverse Multiplexer interface or not.
Auto: Normally, select this setting.
On: Connects to a remote party via the Inverse Multiplexer interface.
Number of Lines: Selects the number of lines usable for BONDING
calling. This item can be set between 1B and 30B.
Cancel
, H
(for North
0
11
Advertisement
Table of Contents
