Suzuki SWIFT Owner's Manual page 145

1) Turn on the cruise control system by
pushing cruise switch (1). When the
cruise indicator light (4) comes on, you
can set cruising speed.
2) Accelerate or decelerate to the desired
speed.
3) Push down the "RES +/SET –" switch
(3), "SET" indicator light (5) comes on.
Take your foot off the accelerator pedal
and the set speed will be maintained.
WARNING
If the cruising speed is set by acci-
dent, you cannot decelerate or could
loose control of the vehicle. This
could lead to an accident, resulting in
severe injury or death.
Turn off the cruise control system
and check that cruise indicator light
(4) is off when the system is not in
use.
Changing speed temporarily
When the cruising speed is maintained, you
can temporarily accelerate or decelerate.
To accelerate, depress the accelerator
pedal. When you take your foot off the pedal,
your vehicle will return to the set speed.
To decelerate, depress the brake pedal.
The set speed will be canceled and "SET"
indicator light (5) will go off.
To resume the previously set speed, push
up the "RES +/SET –" switch (3) and turn
on "SET" indicator light (5) again when
vehicle speed is above 40 km/h (25 mph).
The vehicle will accelerate to the previ-
ously set speed and maintain its speed.
Changing cruising speed
Using the accelerator pedal
To reset at a faster cruising speed, acceler-
ate to the desired speed using the accelera-
tor pedal and push down the "RES +/SET –"
switch (3). The new speed will be main-
tained.
Using the brake pedal
To reset at a slower cruising speed, decel-
erate to the desired speed using the brake
pedal and push down the "RES +/SET –"
switch (3). The new speed will be main-
tained.
OPERATING YOUR VEHICLE
NOTE:
When the brake pedal is depressed, "SET"
indicator light (5) will go off until you reset
the cruising speed.
Using "RES +/SET –" switch
To reset at a faster cruising speed, press
repeatedly or hold push up the "RES +/
SET –" switch (3). Vehicle speed will
steadily increase. When you release the
switch, the new speed will be maintained.
To reset at a slower cruising speed, press
repeatedly or hold push down the "RES +/
SET –" switch (3) until the vehicle has
slowed to the desired speed, and then
release the switch. The new speed will be
maintained.
NOTE:
You can adjust the set speed by approxi-
mately 1 km/h (1 mph) by pushing "RES +/
SET –" switch quickly.
57RK0-14E
3-26