Suzuki SWIFT Owner's Manual page 164

OTHER CONTROLS AND EQUIPMENT
EXAMPLE
3) While holding the hood, pull the prop
rod out from the holding clip, and then
insert the end of the rod into the desig-
nated hole.
CAUTION
• The prop rod can be hot enough to
burn your finger right after driving.
Touch the rod after it becomes cool
enough.
• Insert the end of the rod into the
hole securely. If the rod slips out,
you may get caught in the closing
hood.
• The rod may slip out when the
hood is blown by wind. Be careful
on windy days.
5-3
To close the engine hood:
1) Lift the hood up slightly and remove the
prop rod from the hole. Put the prop rod
back into the holding clip.
57RK053
2) Lower the hood to about 20 cm above
the hood latch, and then let it drop
down. Check that the hood is securely
latched after closing.
WARNING
Check that the hood is fully closed
and latched before driving. If it is not,
it can fly up unexpectedly during
driving, obstructing your view and
resulting in an accident.
CAUTION
To avoid injury, check that no part of
the occupant's body such as hands
or head is in the path of the hood
EXAMPLE
when closing it.
NOTICE
Pushing on the hood from the top
may damage it.
57RK054
57RK0-14E