Table of Contents
Advertisement
EN 16
4.
LC7.1A LA
2 2
2 2
2 2
Figure 4-19 AmbiLight unit
f (1x)
g (2x)
g (2x)
f (3x)
Mechanical Instructions
1
H_17270_015.eps
060707
a
f (2x)
d
Figure 4-20 LCD panel [1/2]
4.3.11 LCD Panel
1. Remove the rear cover, as described earlier.
2. Refer to fig. "LCD panel" below.
3. Unplug the connectors on the Main Supply Panel [a] and
the LED & IR board [c].
4. Unplug the outer connectors [d] from the mid-range
loudspeakers.
5. Do NOT forget to unplug the LVDS connector [e] from the
SSB. Important: Be careful, as this is a very fragile
connector!
6. Remove T10 parker screw [b] that holds the Side I/O
module bracket.
7. Remove T10 parker screws [f] of the central sub-frame.
8. Remove LCD panel fixation screws [g] and lift the complete
central sub-frame from the set (incl. the PSU, SSB, and
Side I/O boards and wiring).
9. Lift the LCD panel [7] from the front cabinet.
e
b
d
c (1x)
G_16860_067.eps
310107
Advertisement
Table of Contents
