Overviewoflp241 Settings; Overview Of 1P 241 Settings - Siemens SIMATIC S5 Equipment Manual

R 02/92

Overview of 1P 241 Settings

2.1
Jumpers A-B/C–D II R18/R27/R30
For configuring the
Connection M ,X
with Mint encoder supply vol-
tage (see section 3)
only to be opened in
the facto I for tests
T
RIS
H
H
C
S2 1 = PBo Sit l–7fade out
i' S2.4 = pBO Sit60utput
S2.9 = Pm Bit 1 output
S3
0
/ -
Reset Kev
S3
All DIP switches that are not required for the respective use must remain open! ' m
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Dip Switch S1
For setting the module address
and the interrupt line
(see section
= S5, A6 :
= :
=
, S1.15 = S5, AlO
1.16 = PESP break point
D
I
Operating Instructions
2.2)
Encoder matching module
Absolute 1 (Excess–3 Gray)
(see section 4)
Encoder matching module
Absolute 3 (analog)
(see section 6)
.
2 – 1