Connecting External Playback Devices (Aux In Mode); Connecting Headphones; Settings Menu - Silvercrest SRH 5 A1 Operating Instructions And Safety Instructions

Connecting external playback devices (AUX IN mode)

In AUX IN mode, you can connect external playback devices such as a smart-
phone or an MP3 player to use them as the playback source for the radio.
NOTE
► Switch the radio and the external playback device off before connecting
them. Note also the operating instructions for the device that you want to
connect to the radio.
Connect the external playback device to the AUX IN connection
♦
radio using the supplied AUX cable.
♦ Briefly press the
If necessary, briefly press the SOURCE /
♦
Auxiliary Input appears on the display
♦ Turn on the external playback device and start playback.
Afterwards, set the desired volume using the VOLUME |
♦
SCAN dial
the external playback device.
♦ To stop AUX operation, turn off the radio and the external playback device.
Remove the AUX cable from the AUX IN connection
natively, you can press SOURCE /
mode to radio mode or Bluetooth

Connecting headphones

Turn the VOLUME |
♦
lowest volume level.
♦ Insert the jack plug of the headphones into the headphone socket
on the rear of the device. Sound playback now takes place only via the
connected headphones.
Set the desired volume using the VOLUME |
♦

Settings menu

NOTE
► The settings menu can be called up during operation as well as in standby
mode.
► If no setting is made in the setup menu for more than 7 seconds, the setup
menu is exited.
During normal operation or standby, press INFO / MENU
♦
2 seconds until System appears on the display
■ 16 │ GB │ IE │ NI
2
button to switch on the radio.
6
on the radio. Alternatively, you can increase the volume on
ENTER / SCAN dial
3
button several times until
1
.
r
of the radio. Alter-
3
to switch directly from AUX IN
®
mode.
6
anticlockwise to the
ENTER / SCAN dial
1
.
r
of the
ENTER /
e
6
.
4
for about
SRH 5 A1