Periodic Maintenance - Sony DSR-2000AP Operating Instructions Manual

Periodic Maintenance

Digital hours meter
The digital hours meter can provide seven items of
information about the operational history of the unit.
The information can be displayed in the display
section of the lower control panel and also, by text
superimposition, on the monitor connected to the unit.
Use the information as a guide in scheduling periodic
maintenance.
For periodic maintenance, cousult your Sony dearler.
Display modes of the digital hours meter
H01: OPERATION mode
Displays the total number of hours the unit has been
powered on in units of 1 hour.
H02: DRUM RUNNING mode
Displays the total number of hours the drum has run
with tape threaded in units of 1 hour.
H03: TAPE RUNNING mode
Displays the total number of hours the unit has been in
fast forward, rewind, playback, search, recording or
editing (except for stop and still) mode in units of 1
hour.
H04: THREADING mode
Display the total number of times tape has been
threaded in the unit.
H12: DRUM RUNNING mode (resettable)
Same as H02 except that the count is resettable.
This can be used as a guide in determining when to
replace the drum.
H13: TAPE RUNNING mode (resettable)
Same as H03 except that the count is resettable.
This can be used as a guide in determining when to
replace such components as stationary heads and pinch
roller.
H14: THREADING mode (resettable)
Same as H04 except that the count is resettable.
This can be used as a guide in determining when to
replace, for example, the threading motor.
134
Chapter 8 Maintenance and Troubleshooting
To display the hours meter
Press the MENU button, then turn the search dial to
display the required item in the display section and on
the monitor connected to the unit.
MENU button
To exit from the hours meter
Press the MENU button or SET button.
To jump to H01
Press the MENU button, then the COUNTER SEL
button.
Every time you press the COUNTER SEL button,
menu item H01 or B01 is recalled alternately.
COUNTER SEL button
Display section
Search dial
SET button