Carrying Out Dmc Editing - Sony DSR-2000AP Operating Instructions Manual

DMC Editing

Carrying Out DMC Editing

Setting the edit points and player speed
84
Chapter 4 Editing
Use the following procedure.
2 4
3 9
MEMORY indicator
1
Press the RECORDER button.
2
Press the ASSEMBLE button or INSERT button to select an edit
mode.
3
Press the DMC EDIT button.
The unit switches to the DMC edit mode, and the DMC EDIT button
lights.
4
Holding down the ENTRY/SHIFT button, press the IN or OUT button
to set an edit point.
5
Press the PLAYER button, to set the player IN point.
Note
It is not possible to set the player OUT point.
6
Press the SEARCH button or search dial so that the SHUTTLE
indicator in the display section is lit.
7
Holding down the DMC EDIT button, turn the search dial to set the
initial speed.
To select normal speed as the initial speed, press the PLAY button.
The speed you set appears in the display section.
8
When the initial speed setting is complete, release the DMC EDIT
button.
Display section
1,7,10
5 6 1