Description Of Parts; Technical Specifications - Silvercrest SWR 1166 A1 Operation And Safety Notes

Always use only the supplied mains adapter to
operate the product.
Grip the mains adapter everytime directly
whenever you want to pull it from the socket.
Do not pull on the cable itself and never touch
the mains adapter with wet hands, as this could
result in either a short circuit or electric shock.
Do not place any furniture or similar items on
the mains adapter cable and ensure that it
cannot become trapped. Never tie knots in the
cable and do not bind it together with other
cables. A damaged mains adapter can cause
a fire or electrical shock. Check the mains
adapter regularly. If it is damaged, contact
your nearest authorized customer service
centre or your dealer to have it replaced.
Never use a damaged mains adapter.
The power socket used must be easily
accessible so that the mains adapter can be
easily disconnected in an emergency.
If you notice any unusual noises, smoke or
similar uncertain situations, immediately
disconnect the mains adapter from the power
supply. Have the device checked by a qualified
specialist before using it again.
Caution:
The mains plug/appliance coupler is used as the
disconnect device, the disconnect device must
remain readily operable.
Warning:
Before operating this system, check the voltage of
this system to see if it is identical to the voltage of
your local power supply.
– The power supply may only be used in dry
rooms;
– Unplug before cleaning;
– Keep away from splash or dropped water.

Description of parts

Q
The Rear Panel
6
5
4
4 x Lan Ports: Connect to laptop, computer or
1
other device
1 x Wan Port: Connect to XDSL/ Cable
2
Modem/ Ethernet
Power Port: Connect to power adapter
3
WPS button
4
Reset Button: Press it for 5-10 seconds while the
5
router is working and it will reset to factory setting
Power ON/OFF switch
6
Technical specifications
Q
WLAN standard
Frequency Range
Data transfer speed
Security encryption
Standard
Frequency band
Max. transmitted power 17 dBm
Connections interface
4 x 10/100 Mbps RJ45 LAN
1x 10/100 Mbps WAN RJ45 port
Dimension
Weight
Operating temperature 0°C ~ 40°C (32°F ~ 104°F)
Operating Humidity 10% ~ 90% non-condensing
Storage temperature - 40°C ~ 70°C (- 40°F ~ 158°F)
Storage Humidity
Power Supply (For dry indoor use only)
Model/ Type
Manufacturer
Input Voltage/
Frequency
output Voltage
Output Current
Protection class
1
2
* Technical data and design may be changed
without notification
3
802.11 a/b/g/n/ac
2.4 GHz, 5 GHz
Up to 1166 Mbps
WPA-PSK, WPA2-PSK,
WPA-MIXED-PSK
2.4 - 2.4835 GHz,
5.15 - 5.25 GHz
Approx. 183.5x134.5x38.2 mm
Approx. 288 g
5% ~ 90% non-condensing
RD1201000
Shenzhen Ruide Electronic
Industrial Co., Ltd
AC 100 - 240 V, 50/60 hz
DC 12 V
1A
II/
GB / IE 19