Silvercrest SWR 1166 A1 Operation And Safety Notes page 24

A user name should consist of at least
8 characters. These should consist of letters with
upper case and lower case as well as optionally
special characters and one or several numbers.
A correspondingly long email address of the user
should be accepted.
A password should consist of at least
10 characters. It should contain characters in
upper and lower case, numbers as well as special
characters.
Enter new user name and password login
again, then enter into setup page.
Click Network - - -> WiFi Repeater, the
following page will appear.
Click the "ON" button for the WiFi repeater
mode(the default mode is OFF). Select the
network SSID which you want to boost. And then
input the password of the chosen network.
Click "Save/Apply''.
24 GB / IE
SET UP REPEATER MODE BY COMPUTER:
Power on the router and remove the Ethernet
cable from Wan port.
Connect a computer with an Ethernet cable or
connect wirelessly.
— For a wired connection, use an Ethernet
cable to connect your computer to a yellow
Ethernet LAN port on your router.
— To connect wirelessly, use the default
wireless network name (SSID) and password
printed on the product label at the bottom of
the router.
Your computer will automatically jump to the
router setting page after connecting. If not, you
could enter 192.168.1.1 on the address bar
of a web browser to enter the setting page.
In this setup page can select your preferred
language (English/ German/ French/ Czech/
Dutch)