Setup; Center Module Installed System Setting - Panasonic Attune WX-C3010 Installation Instructions Manual

6. SETUP

6.1 Center Module Installed System Setting

After the completion of installation work, system setup shall be made according to the equipment to be connected and the
operation mode. Setup operation for the installed system shall be carried out by the use of the PREV/NEXT button and the
SEL button.
1. Turn on the power supply of the center module.
2. Press the [NEXT] button or the [PREV] button.
Indicator of the selected setup item blinks. Each
time the [SEL] button is pressed, there is a
reciprocal changeover between ON Select and OFF
Select status. The ON/OFF status can be defined by
the style of indicator blinking.
OFF: Lighting time is short and unlighting time is
long.
ON: Lighting time is long and unlighting time is
short.
3. When the ON/OFF is changed over, the selected
status is reflected on the system in real-time.
4. When the [NEXT] button is pressed, the next setup
item is selected. (The setup item selected will be
moved by one to the lower position or to the top
right.) When the [PREV] button is pressed, the
previous setup item is selected. (The setup item
selected is moved by one to the upper position or to
the bottom left.)
5. If any [NEXT], [SEL], or [PREV] button is not pressed
for 10 seconds, blinking of the indicator is finished.