Table of Contents
Advertisement
7 DOUBLE DRIVE-THRU INSTALLATION
In the case of double drive-thru, it is possible to talk or page by selecting either Lane A or Lane B. In regard to the method
of lane changeover operation, refer to the operating instructions of the Order Taker (WX-T3020) or the All-in-One Headset
(WX-H3050).
7.1 General Double Dual Drive-thru
Tandem Drive-thru
7.2 Double Drive-Thru Operating Procedures
When Double-Drive-Thru connections are made with the center module, any headset is required to select the center
module of either Lane A or Lane B.
<For Normal setup>
1. When a connection is made to Lane A, the lane indicator is lit in yellow. Press the T2 button if you want to make a
connection changeover to Lane B. When connected to Lane B, a voice of [Lane B] is heard from the speaker of the
headset and the lane indicator is lit in green.
2. While a connection is maintained to Lane B, the lane indicator is lit in green. Press the T2 button if you want to make a
connection changeover to Lane A. When connected to Lane A, a voice of [Lane A] is heard from the speaker of the
headset and the lane indicator is lit in yellow.
Order Taker Unit
(WX-T3020)
Order Taker Unit
(WX-T3020)
Dual Drive-thru
All in One Headset
(WX-H3050)
All in One Headset
(WX-H3050)
Hide quick links:
Advertisement
Table of Contents
