Sony LF-X1, LF-X5 Operating Instructions Manual page 22

Using a VCR and TV
Connect the VCR to the VIDEO INPUT 2 terminal on the base station, and then connect the
VIDEO OUTPUT terminal on the base station to the A/V input terminal on the TV, as shown
below.
The VIDEO OUT terminal outputs the
audio/video signal coming from the
device connected to the IN2 terminal.
A/V cable
(not supplied)
from antenna
to VHF/UHF
input jack
Connecting a Digital Video
Camera Directly to the
Monitor (LF-X1 Only)
Use a mini AV cable (not supplied: VMC-
N320TP, VMC-N120TT) to connect a digital
video camera directly to the AV IN jack on the
left side of the monitor.
22
to A/V output
terminal
VCR
Audio/video signal flow
Rear of base station
TV
Antenna cable (not supplied)
to VHF/UHF
output jack
to A/V input
terminal
Antenna cable
(not supplied)
to VHF/
UHF
input
jack
Antenna cable
(not supplied)
Antenna
splitter
(not
supplied)