Sony LF-X1, LF-X5 Operating Instructions Manual page 57

Configuring the monitor to connect
using NetAV
1
Open the [Settings] window and select
[Monitor].
The [Monitor] window appears.
2
Select [NetAV Settings].
The [NetAV Settings] window appears.
3
Select [NetAV Connection].
The [NetAV Connection] window appears.
4
Set the following items and select [OK].
1 IP address or base station domain name*
when connecting with NetAV.
If you input an IP address, enter the IP
address you wrote down in the section
"Setting Up the Monitor" (1 page 54) or,
input the domain name you acquired.
2 Port number for the NetAV
Enter the port number for the NetAV server.
(Set the port number between 5021 and
5999.)
3 [OK] button
The [NetAV Settings] window reappears.
5
Select [Back].
The [Monitor] window appears.
6
Select [Settings], then select [Exit].
* For more on domain name, refer to the
LocationFreeTV FAQ.
(http://www.sony.com/locationfree/faq/).
Setting the Dynamic DNS client on
the base station
For more on how to configure settings, refer to
the LocationFreeTV FAQ
(http://www.sony.com/locationfree/faq/).
Registering Other Monitors
You can register other monitors to a single base
station. When registered, either monitor (B or
C) can connect to the base station A in On the
go-Wireless or Wired LAN mode and enjoy
NetAV.
A
A
Notes
• You cannot use Registering Other Monitors for
purposes other than individual use.
• To use Registering Other Monitors, the base station
A must have the necessary environment and
settings to connect with NetAV. For more on NetAV,
see page 55.
• The registered other monitors (B and C) cannot
connect to the base station A in Home-Wireless or
Wired LAN mode.
• Up to 4 monitors can be registered with a single base
station, but multiple monitors cannot view video and
TV content at the same time.
What's NetAV
B
C
57
Continued