Sony LF-X1, LF-X5 Operating Instructions Manual page 35

Connecting two devices to a single
input terminal
Set the device directly connected to the unit
as the first device.
When connecting an all-in-one
device (e.g., a VCR+DVD player)
The second remote control is automatically
set when you select a device displayed as all-
in-one device from the [Type] list (e.g., Sony
"VCR+DVD Player"). Touch the [Switch]
button on the on-screen remote control to
switch between the remote control for the
VCR and the remote control for the DVD
player.
7
Select [Back].
The [Remote] window reappears.
8
Select [Back] or [Exit].
The [TV/Video] window reappears.
9
Select [Settings], then select [Exit].
10
Open the [Index] window.
[Video 1] or [Video 2] in the window is now
replaced with the type name of the selected
on-screen remote control.
Example: When you have set the remote
control for a DVD player to
[Video 1], [Video 1] is replaced
with [DVD Player].
Using the On-screen Remote Control
11
Select the type of the on-screen remote
control.
The remote control appears at the right side
of the screen, so that you can control the
connected equipment.
z
Tip
You can change channels by sliding the stylus
across the screen from left to right or right to left,
if the connected equipment contains a tuner, such
as cable TV set-top box. For more information,
see "Watching TV and Video" (1 page 65).
12
After checking that the connected devices
operate properly, remove the backing paper
from the IR Blaster.
13
Secure the IR Blaster in the location you
determined in step 2 (1 page 33).
Setting up multiple external devices
First, connect the devices you want to use.
1
Follow steps 3 to 6 in "Setting Up and
Connecting the IR Blaster" (1 page 33) to
configure the first device.
2
Select the make and type of the second
device (the one connected via the first
device) from the [Make] list in the lower part
of the window. Make sure you can turn the
device on and off.
3
Secure each IR Blaster in the location you
determined in step 2 (1 page 33).
Backing paper
35
Continued