Panasonic U-4LE1R8 Service Manual page 31

3. Detailed Settings Function
Item code Item
Fan tap setting
(Fan tap change in order
to prevent drop in air
discharge caused by
fi lter installation)
Humidifi er ON time
(ON time per 60
seconds)
Repeat timer switching
Timer function change
prohibit
Smudging control
Setting the Flap
Separately
*Only for 4-way
Cassette type
Setting the Flap
Separately
*Only for 4-way
Cassette type
Setting the Flap
Separately
*Only for 4-way
Cassette type
Setting the Flap
Separately
*Only for 4-way
Cassette type
No.
DC fan tap operating
mode
0000 Standard
High ceiling use
0001
For low
static-pressure fi lter
High ceiling use
For low
0003 static-pressure fi lter
For air-blocking
material
For air-blocking
0006
material
0000 No humidifi er output
0001 1 sec.
0002 2 sec.
0058 58 sec.
0059 59 sec.
0060 Continuously ON
0000 Function disabled
0001 Function enabled
0000 Function disabled
0001 Function enabled
0000 No smudging control
0000
Air discharge
port
0001
0002
Flap
0003
(adjustment for
up-down
0004
airflow direction)
0005
0006
Setting data Flap position during operation
Without separate setting
Swing
Move to position 1 and stay
Move to position 2 and stay
Move to position 3 and stay
Move to position 4 and stay
Move to position 5 and stay
2-13
Remote Controller Functions
Setting data
Description
Purpose
Standard (setting at shipment)
High ceiling setting 1 (with standard panel)
Ultra long-life fi lter, oil guard panel, ammonia deodorizing
fi lter, optical regenerative deodorizing fi lter
High ceiling setting 2 (with standard panel)
(Antibacterial) high-performance fi lter (90%)
(Antibacterial) high-performance fi lter (65%)
Air-cleaning unit, air-cleaning unit + optical regenerative
deodorizing fi lter, deodorant (activated charcoal) fi lter
For 3-way discharge, when discharge duct is connected
For 2-way discharge
Flap 1 =90
(Motor No. 4)
Flap 2 Flap 4
(Motor No. 2) (Motor No. 3)
=91
Flap 3 =92
(Motor No. 1)
When the flap position is set to
4 or 5 and the unit is in the
cooling or dry mode, the flap
position is moved to 3 and the
operation is started.
NOTE
The flap swings during the
operation under "Setting the
Flap Separately".
At this time, the unselected flaps
are moved to the position 1 .
Mini VRF SYSTEM
Flap position
Electrical
1
component
box
2
3
4
5
=93
2