Adjustment; 调整 - Kenwood NX-800 Service Manual

NX-800
Controls
Power switch
Volume Up/Down key
Modular
Programmable function keys
MIC jack
KMC-36
[PTT]
Panel Test Mode
■ Test mode operation features
This transceiver has a test mode. To enter test mode,
press and hold the [ ] key while turning the transceiver
power ON. Before the transceiver enters test mode, the
frequency version information appears on the LCD mo-
mentarily. Test mode can be inhibited by programming. To
exit test mode, turn the transceiver power OFF. The follow-
ing functions are available in test mode.
■ Key operation
"FNC" not appears on the sub LCD display
Key
Function
[ ] / [ ] Test CH up/down
[ ] / [ ] Volume up/down
Push: Squelch level up
[ ]
Hold: Squelch off
[ ] Wide/Narrow/Very narrow
[ ] Shift to panel tuning mode -
[ ] Function on
[ ] MSK 1200bps and 2400bps 2400bps:
[ ] Test signaling CH up
62

ADJUSTMENT /

Channel Up/Down key
Keypad
[HOOK]
Display
Channel No.
-
Squelch level
Squelch off: icon appears
Wide: "w"
Narrow: "n"
Very narrow: "v"
"FNC" appears on the sub
LCD display
icon appears
Signaling No.
调整
控制
电源开关
音量高/低键
模块化
可编程功能键
MIC插孔
KMC-36
[PTT]
面板测试模式
■ 测试模式操作功能
本车载对讲机有测试模式。要进入测试模式，打开车载对
讲机电源时，按住 [ ] 键。车载对讲机进入测试模式之前，
LCD 上短时间出现频率版本信息。
可以通过编程禁用测试模式。如需退出测试模式，请关闭
车载对讲机电源。在测试模式可以使用下列功能。
■ 键操作
副 LCD 显示上不出现"FNC"
键
功 能
[ ]/[ ] 测试信道递增 / 递减
[ ]/[ ] 音量升高 / 降低
按下 : 静噪电平递增
[ ]
按住 : 静噪关
[ ] 宽 / 窄 / 超窄
[ ] 换到面板调谐模式
[ ] 功能开
[ ] MSK 1200bps 和 2400bps
[ ] 测试信令信道递增
信道上/下键
键盘
[HOOK]
显 示
信道号
-
静噪电平
静噪关 : 图标出现
宽 :"w"
窄 :"n"
超窄 :"v"
-
副 LCD 显示上出现
"FNC"
2400bps: 图标出现
信令号