Section 4
Using local HMI
4.17
48
GUID-93D3FAAC-22DD-4D72-8529-33598E0C308C V1 EN
Figure 28:
Fault records page
Selecting USB actions
The USB Actions page enables exporting various data from the relay.
Device information, events, fault records, parameters and the alarm list are saved in
TXT format.
Disturbance records and load profile record files are saved in CFG and DAT formats.
1.
Tap the menu button.
2.
Tap USB Actions.
3.
Select the data to be saved to USB by tapping the corresponding rows.
4.
Tap Save to USB.
The USB port of the LHMI is disabled by default. To be able to
access the USB actions page, the USB port needs to be enabled
by the parameter Enable USB access via Parameters/
Configuration/HMI.
Save to USB is not activated until a USB memory is connected
to the USB port of the HMI.
1MRS759118 A
REX640
Operation Manual