Huawei SUN2000 Series User Manual page 60

SUN2000-(90KTL-100KTL) Series
User Manual
Procedure
Step 1 Remove an appropriate length of the jacket and insulation layer from the tracking power cable
using a wire stripper. (Ensure that the jacket is in the maintenance compartment.)
Figure 5-31 Stripping a cable
(A) Core wire
Step 2 Remove the shielding cover from wiring terminals.
Figure 5-32 Removing a shielding cover
Step 3 Route the cable through the cable gland.
(B) Insulation layer
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
(C) Jacket
54