Mitsubishi Electric MELPRO S Series Operation Manual page 2

Before installation, operation, maintenance, and inspection, please be sure to read this instruction manual
and all other attached documents thoroughly in order to work safely with the equipment. Please ensure that
you fully understand the equipment, safety information, and precautions that need to be taken before
working with the equipment.
Safety precautions are classified as "Danger" and "Caution."
Danger
Caution
Furthermore, even with items described as
depending on the situation. All of the described contents are important. Therefore, be sure to comply with
them.
[Transportation]
●Transport the equipment in the correct orientation.
●Do not apply excessive shock and/or vibration as this could affect the performance and life of the
product.
[Storage]
The storage environment shall comply with the following conditions. Otherwise, there is a risk of reducing
the performance and life of the product.
- Ambient temperature
• Frequency variation
- Altitude
- The equipment must not be exposed to abnormal vibration, shock, inclination, or magnetic fields.
- The equipment must not be exposed to harmful smoke/gas, saline gas, water droplets or
vapour, excessive dust or fine powder, explosive gas or fine powder, wind & rain.
- Safety precautions -
The case where a dangerous situation can arise and there is the possibility that death or
seriously injury can occur if the equipment is handled incorrectly.
The case where a dangerous situation can arise and there is the possibility that moderate
or minor injuries canl occur, or property damage can take place if the equipment is handled
incorrectly.
-25 to +70°C
The state where dew condensation or freezing does not occur.
Within ±5% of the rated frequency
2000 m or lower
Caution, there is the possibility of serious consequences
Caution
Caution
2 / 47 JEP0-IL9537