4.6.8.
Set PASSWORD
There is PASSWORD function for the changing password.
If password is set "000", the password function is disable. Default password is "000" (= disable).
After setting password, the entering password is needed for some items. More details, please refer to section
3.2.
By this password, some operation items of Switch-1 are protected.
The protected items are shown in Table 3-1 and Table 3-2.
How to input the password, refer to clause 4.6.1.
Turn Switch-1
to SETTING
(position 7).
Turn Switch-3
to PASSWORD
(position 15).
Setting digit is
blinking.
36 / 47
JEP0-IL9537