Canon Booklet Finisher-D1 Service Manual page 58

2
Technology > Detecting Jams > Jam inspection in Finisher
Jam type Sensor
Lower Path Sensor Delay UN22 Lower Path Sensor (UN22) doesn't detect the
paper within the specified time (distance) after
Buffer Path Sensor (UN14) detects the paper and
do the feeding.
Lower Path Sensor Stationary UN22 The paper doesn't come out from Lower Path
Sensor (UN22) within the specified time (distance)
after Buffer Path 2 Sensor (UN14) detects the
paper and do the feeding
Lower Delivery Sensor Delay PS6 Lower Delivery Sensor (PS6) doesn't detect the
paper within the specified time (distance) after
Buffer Path 2 Sensor (UN14) detects the paper
and do the feeding.
Lower Delivery Sensor PS6 The paper doesn't come out from Lower Delivery
Stationary Sensor (PS6) within the specified time (distance)
after Buffer Path 2 Sensor (UN14) detects the
paper and do the feeding.
Processing Tray Staple PS27 The Stapler HP Sensor (PS27) doesn't detect the
Stationary paper within the specified time after Stapler Motor
(M25) is triggered, and if Stapler Motor (M25)
rotates counter clock wise, Staple HP Sensor
(PS27) is turned ON.
Paper ID Mismatch - There is Paper ID mismatch informed by the
Upstream Unit, when the paper starts to deliver
from Upstream Unit.
Upstream Unit Stationary - After jam occurred on Upstream Unit, if a paper
which result can not be guaranteed is fed, and
arrived in Finisher.
Remain (when Power On). - When Power On, there is remain paper in the
Feed Unit.
Door Open MSW1 In the middle of the movement, it is detected that
front cover switch's (MSW1) cover is open.
Remain (On the initial rotation) - In the middle of initial rotation of host machine,
there is remained paper in the Feed Unit.
Retry Error Jam - During possible error in the retry, if the first error
on the job is detected.
2 Technology > Detecting Jams > Jam inspection in Finisher
Jam description Code
100C
110D
100E
110F
1524
1231
1F03
1320
1422
1721
1C01
T-2-5
2-39
2-39