I Cannot Perform An Ir Hotsync ® Operation - Sony CLIE PEG-TG50 Troubleshooting Manual

I cannot perform a HotSync
B Should a problem occur when the Speed setting in the Setup/Modem
window of HotSync Manager is As fast as possible or at a certain
speed, try setting at a lower speed.
B Check that the Speed setting in the Setup/Modem window is
appropriate for your modem.
B Turn off the modem for a while and turn it on before connecting it again.
I cannot perform an IR HotSync
B Check that the IR port of your computer is enabled.
®
B An IR HotSync
an IR port.
B Check that the HotSync
right-hand corner of your computer screen and the HotSync Manager is
running. When the HotSync Manager is running, the shortcut menu should
be displayed by clicking the HotSync
B If you are using Windows
HotSync icon in the bottom right-hand corner of your computer screen
and check that the Beaming check box is selected.
B If you are using Windows
Edition, click the HotSync
your computer screen and check that the Local Serial check box is
selected.
B If you are using Windows
Edition, click the HotSync
your computer screen and click the Local tab in the Setup window. Then
check that the simulated port for IR communication is selected in Serial
Port.
B Check that Local and IR to a PC/handheld are selected in the HotSync
screen on your CLIÉ handheld.
®
operation via a modem
operation is not available if your computer does not have
icon is displayed in the task tray in the bottom
®
2000 Professional/Windows
®
98 Second Edition/Windows
icon in the bottom right-hand corner of
®
98 Second Edition/Windows
icon in the bottom right-hand corner of
®
operation
icon.
®
XP, click the
®
®
Continued on next page
• • • • • • • • • • • • • • • • • • • • • • • • •
Millennium
Millennium
23