Silvercrest SWV 733 B1 Operating Instructions And Safety Instructions page 51

2. Alternatively you can perform the configuration via a wireless network. To do so, start the
search for available wireless networks on your computer. The host network SWV 733 B1
2.4G or SWV 733 B1 5G is displayed in the list of available wireless networks. Select the
host network SWV 733 B1 2.4G or SWV 733 B1 5G and click on the Connect button
to wirelessly connect to the Dual-Band Range Extender. The Dual-Band Range Extender
comes secured
(9426824723156819), the Connect without configuring the network option
must be clicked on. The "Limited network connection" message is displayed, if necessary.
Please note that the network name (host SSID) SWV 733 B1 2.4G or SWV
733 B1 5G is only shown, if this has not previously been changed. In the case of
a changed host network name, select the corresponding host SSID.
Please note that the host password 9426824723156819 only works, if this
has not previously been changed.
Once you have established connection as previously described, open the Internet browser on
your computer. Enter https://repeater.setup in the address line of your Internet browser and
confirm the entry with the Enter key.
with a host password.
SilverCrest SWV 733 B1
After entering the host password
English - 49