Sony SAT-A4 Operating Instructions (primary manual) Operating Instructions Manual page 79

Back Panel (SAT-A4)
Connector
SATELLITE IN
DIGITAL OUT
LOW SPEED DATA
VCR CONTROL
RF REMOTE
AUDIO (R)/(L)
OUT
VIDEO OUT
S-VIDEO OUT
CH3/CH4 Switch
VHF/UHF IN
VHF(SAT)/UHF OUT
TEL LINE
AC IN
Description
Connects to the LNB on the Satellite Antenna.
Connects to the optical in jack on your Dolby Digital decoder or
Dolby Digital A/V receiver.
Allows you to connect your Digital Satellite Receiver to new
technologies, as they are introduced. Additional accessories may be
required.
Sends IR signal from Digital Satellite Receiver to VCR. Allows the
Digital Satellite Receiver to automatically control your VCR's
recording functions when you record a program.
Connects to the RF antenna.
Connects your Digital Satellite Receiver to the right and left audio
inputs of your audio or video component.
Connects your Digital Satellite Receiver to your TV or VCR's video
input.
Allows you to connect your Digital Satellite Receiver directly to your
TV (if your TV has S-VIDEO IN).
When you use an RF connection, this setting determines the TV
channel on which programs from the Digital Satellite Receiver can be
viewed.
Allows you to connect your Digital Satellite Receiver to your normal
(terrestrial) TV or cable TV service.
Connects to your TV or VCR.
Connects your Digital Satellite Receiver to a telephone jack. This
allows you to order pay per view programs.
Connects your Digital Satellite Receiver to a 120 V AC outlet.
Cable Type
Solid Bare Copper
RG-6 Coaxial
(75-ohm/F-type)
Optical cable
Depends on future
applications
(D-sub 9 pin)
Audio mono miniplug
RCA-type
Audio (2)
(RCA-type)
Video
(RCA-type)
S-Video
(4-pin mini DIN)
RG-59 Coaxial
(75-ohm/F-type)
RG-59 Coaxial
(75-ohm/F-type)
Telephone (RJ-11)
AC
79