Sony SAT-A4 Operating Instructions (primary manual) Operating Instructions Manual page 82

82
Button Operates Description
TV
TV/VIDEO
SAT
TV/SAT
SAT
JUMP
TV
SAT
FAVORITE
SAT
0
to 9
TV
Cable box
SAT
DISPLAY
TV
SAT
ENTER
TV
Cable box
SAT
INDEX
SAT
CATEGORY
SAT
GUIDE
SAT
TV
SAT
VOL CH
TV
PAGE
SAT
EXIT
TV
Switches the input of the TV.
Switches the output of the Digital Satellite
Receiver to TV (normal TV programs), if you've
connected a TV cable or antenna, or to SAT
programs.
SAT: Used to tune to and set stations in the Jump
Loop (SAT). See "Using the Jump Loop Feature"
on page 48 for details. TV, Cable: Tunes to the last
station you were tuned to.
Used for setting up and using the Favorite
Station Guides. See "Using the Favorite Station
Guides" on page 37 for details.
Specifies the station number. SAT: In menus,
selects the menu item with the corresponding
number. Also, in some screens, used to enter
numerical values (such as a spending limit or
passcode).
Toggles through the different displays of on-
screen guides (SAT) or other display (TV). See
"Using the DISPLAY Feature" on page 41 for
details.
Used with 0-9 buttons to change stations without
any delay in tuning.
Brings up the Index.
Brings up the Category Guide.
Brings up the Custom Guide. If you're already in
a program guide, pressing GUIDE repeatedly
brings up future time slots in the guide.
When moved forward, back, left, right, and
diagonally, highlights items in the on-screen
displays (program guides, menus, etc.). When
pressed, selects highlighted items.
VOL: Increases and decreases the volume.
CH/PAGE: Moves to the next (+) or previous (-)
station during normal viewing. In SAT program
guides and some setup screens, these buttons
page through the on-screen displays.
Clears all on-screen displays, including program
guides, menus, etc. If you press EXIT before you
complete your selections, the previous selections
are restored.